inner banner inner banner
Aircooled Thermal Oil Pump
The up series comprises horizontal single stage centrifugal pumps, specially designed for the pumping of thermal fluids at a high temperature, in an industrial installation, without needing any type of external refrigeration. The hydraulic characteristics of pumps are in accordance with the standard DIN and all international for pumps. This means that for each installation the most suitable pump can be used to give optimum performance.
From the hydraulic point of view, the Aircooled thermal oil pumps are centrifugal single stage, horizontal, volute type pumps. With regards to the mechanical design, the main concept of the Aircooled thermal oil pump series is to a maximum, the mechanical seal and ball bearing from the source of heat that constitutes the pump casing, placing between both a thermal barrier and cooling the mechanical seal housing and bearing support by natural convection
All kinds of heat transfer liquids.
The impeller of the Aircooled thermal oil  pumps are single entry, closed type and dynamically balanced. The impeller has back Ring & Holes between each fin for the axial balancing of pressures.
Single spiral volute type radially split with integrated suction and discharge ports and also integrally cast feet for baseplate attachment. Thanks to back pullout design, maintenance is much easier as the inside of the pump can be dismounted without needing to disconnect the casing from the pipe-connections. Suction Port is axial and discharge is vertical.
The impeller is overhung mounted on the end of the end the shaft. The shaft is designed to be able to withstand all mechanical and thermal efforts generated during operation of the pump with minimum deflection. The bearing housing is made of cast iron and apart from serving as the shaft support; it also houses the mechanical seal. It is equipped with external cooling wings.
Shaft sealing is obtained by means of a high-security mechanical seal, placed in the bearing housing, close to the second ball bearing near to the shaft end. This means that the seal is housed in allow temperature zone, given the distance from the pump casing, thus obtaining a long life for the seal. The first ball bearing near to the casing is lubricated by pumped liquid. A safety stuffing box with the following throttling area is arranged in front of the first ball bearing and mechanical seal. Even in case of failure of the mechanical seal, these additional safety elements prevent seepage from emerging in a hazardous quantity and manner. The second ball bearing is located near the end of the shaft and lubricated by grease for life.
Suction and Discharge Nozzles DN 32 – DN 150
Operation pressure 16 Bar
Speed 1450 – 2900 - 3600 RPM
Capacity Range 10 – 750 m3 / hr
Head Range 10 – 110 m.
Temp Range 100º C – 350º C
For standard construction, the Aircooled thermal oil pumps Casing and Impeller are made with Nodular Cast Iron JS 1025 which is very resistant to high temperatures. Stuffing box and bearing housing are made of cast iron (GG 26) Shaft are made of very high tensile strength material 431 stainless steel.
Leather Industries. Laundries. Wood & Ply Board Ind. Paper / Sugar Mills.
Rubber Industries. Textile Plants. Chemical and Petrochemical Processing Industries. Manufacturing of Plastic and Synthetic Fiber Material.

Download Broucher